;

EZ Curb Light

                     

EZ Curb Light is an LED Rope lighting system that lets you easily install 50 Feet of LED lighting along the back of any curb.  Easily add lighting accents to your curb  creating a stunning look after the sun has gone down. Your customers will be excited by the look it will create in their yard.

                       
   

EZ light picture    


   

Features

   
                    Premium LED rope light                      

LED rope lighting is efficient and long lasting. The 50 feet of rope light will provide 4000 lumens of light while consuming 40 watts of energy. It is rated 50,000+ hours of life. Our rope light is supplied with a rectifier eliminating the undesirable 60 hertz shimmer that exists with cheaper systems.,  Cheaper LED systems hook an AC power supply directly to the LED's, But an LED only creates light when electricity flows through it in one direction. When you hook an LED directly to an AC power supply the led turns on and off 60 times a second.

                   
    Easy to install                     

Place Rope Light tracks on cured concrete by drilling 1/4 inch mounting holes in the curb.  Tracks are pre-drilled - 5 holes in 4 feet. Drill your holes approximately 1 inch deep. Mount the tracks with a hammer and punch using the provided anchors. Push the rope light into the tracks. Connect two wires to the transformer and you are finished.

                   
    Easy to use and flexible                      

Control your lighting the way you want after it is installed. The transformer has  the following settings: on, off, photocell activated, 4 hour (transformer is turned on with the photocell and then turns off 4 hours later), 6 hour, and 8 hour.

                   
   Safe                      

12 volt Low voltage power is safe to use in your yard. The transformer also has a circuit breaker in case an unexpected short occurs

                   
   
   

Tools required for installation

   
   

EZ light install

   
   

     
  • Hammer drill
    •  
  • 1/4 inch masonry drill
    •  
  • Hammer
    •  
  • Large punch
    •  
  • Fine tooth hack saw (for shortening rails and rope if shorter distance is required)
    •  
  • Wire stripper
    •  
  • flat bladed screw driver
    •  
  • 12/2 underground landscape wire and waterproof connectors if a longer distance between the transformer and the rope light is required
    •  
  • silicone caulk clear (for end cap if rope light is shortened)

   
   
   

EZ Curb Light kit contains

   
   

EZ light kit

   
   

     
  • 50 feet of LED rope light
    •  
  • Transformer with 5.5 foot cord
    •  
  • (13) 4 foot sections of track
    •  
  • (65) anchors
    •  
  • (1) rope end cap (used if rope light is shortened)

   
     
   

See our other items or contact us.

                       

                 
©2016 Curb King