This Pharmacia Biotech EPS 3501 XL Electrophoresis Power Supply is in good condition and is guaranteed to be fully functional. This item came from a local lab that had surplus inventory and shows slight signs of normal use. We urge customers to view all photos as they show overall condition, included accessories, and functionality. Please feel free to contact us with any questions.
EPS 3501 XL Power Supply
EPS Power Supplies cover the wide range of electrophoresis and blotting applications. Designed for performance, EPS Power Supplies can be relied on for security and reproducibility.
3500 V, 400 mA, 200 W maximum.
Constant voltage, constant current, constant power, and linear voltage ramp modes.
Linear voltage ramp mode brings proteins to focused equilibrium in IPG strips quickly without danger of overheating.
Volt-hour and milliampere-hour modes compensate for variations in gel thickness, sample ionic strength, and temperature.
Stores and recalls up to nine protocols, each with nine phases and phase-end alarms.
Program automatic shut-off or phase end based on time, volt-hour/milliampere-hour.
Current rating of up to 400 mA to handle both electrophoresis and basic blotting applications.
Current resolution of 1 µA for Immobiline DryStrip and other IPG separations.
All EPS Power Supplies offer Easy-to-read digital display. Timed or continuous runs, with end-of-run alarm, if desired. Automatic parameter limit crossover to prevent overheating and protect experiments and equipment. Automatic recovery after power failure. Membrane keypads for easy programming. Two pairs of power outlets for duplicate parallel runs.
General guidelines for using power supplies: The constant current mode is recommended for blotting to prevent overheating. The constant voltage mode is recommended for other applications, such as nucleic acid submarine and mini-vertical gel electrophoresis. When connecting two electrophoresis units to the same power supply, twice as much current is required at the same voltage. To maintain a constant temperature without using a thermostatic circulator, use the constant power mode.
Power
1-200 W
Programming Range
Voltage: 35-3500 V DC Current: 1-400 mA Power: 1-200 W Time: 00:01-500 h Volthour: 1-500 000 Vh Amperehour: 1-25 000 mAh
Output Resolution
Voltage: 1 V Current: 1 μA, 0-399 μA 10 μA, 0.4-3.99 mA 100 μA, 4.0-19.9 mA 1 mA, 20-400 mA Power: 1W
Programming Resolution
Voltage: 5 V Current: 1 mA Power: 1 W Time: 1 min, 00:01-99:59, 1h, 100-500 h Volthour: 1 Vh, 1-9999 Vh, 100 Vh, 10.0-99.9 kVh 1 kVh, 100-500 kVh Amperehour: 1 mAh, 1-999 mAh 10 mAh, 1.00-9.99 Ah 100 mAh, 10.0-25.0 Ah
Accuracy
Voltage: 1%, ± 5 V Current: 1%, ± 1 mA Power: 2%, ± 1 W Timer: 0.1% ± 1 min, 00:01-99:59 h 0.1%, ± 10 min, 100-500 h
Start Current Check
Resistance not greater than 5 MΩ at 40 V (Current less than 8 μA). Can be disabled
Output Protection
Fully protected against any overload conditions
Recovery After Power Failure
Duration < 8 s, The program continues automatically Duration ≥ 8 s, The program continues after manual restart
Operating Temp. Min.
4°C
Operating Temp. Max.
40°C
Operating Humidity
0-0.95
Operating Pressure Max.
106 kPa according to GPR
Mains Requirement
102 to 120/200 to 240 V; 50/60 Hz
Power Consumption
260 W
Height
95 mm
Width
250 mm
Depth
315 mm
Weight
3.8 kg
Timer Operation
1 min to 500 h, continuous; 1 Vh to 500 kVh;1 mAhr-25 AHR