The RSS265HO-44 10" High Output Reference Subwoofer from Dayton Audio is
designed for high power handling and extremely low distortion. A small enclosure
requirement allows it to be used in car audio and space limited home audio
applications.
Key Features
Dual 4 ohm voice coils for many wiring options
Extensively vented motor eliminates compression and allows quiet
excursion
Extra-thick black anodized aluminum cone for maximum rigidity
Triple shorting-ring motor for ultra-low distortion
Parameters optimized for small enclosures
Highest quality materials throughout for long-lasting performance
Dayton Audio's 10" RSS265HO-44 High Output Reference Series subwoofer is
purpose-built for moving lots of air, extreme power handling, extremely low
distortion... and it does it all with an extremely small enclosure requirement!
The minimum airspace optimization of this driver makes it perfect for car audio
automotive applications and limited space home audio applications.
To minimize distortion, three copper short-circuit paths are built into the
motor. This reduces second, third, and intermodulation distortion to levels only
attained previously by expensive, exotic subwoofers. A side benefit is reduced
energy storage and inductance, making the RSS265-HO-44 a very musical subwoofer.
In fact, frequency response remains very flat up to 500 Hz.
Additional features include: a heavy gauge black anodized aluminum cone
that resists deformation from extreme air pressure levels found inside of small
sealed enclosures, a fully ventilated motor for reduced power compression, a
rigid cast aluminum frame for structural integrity, and a tough rubber surround
that won't wear down over years of use. Dual 4-ohm voice coils allow for a wide
array of wiring options.
As with all Dayton Audio subwoofers, you receive a full 5-year warranty.
Designed and engineered in the U.S.A.
Product Specifications
Nominal Diameter 10"
Moving Mass Of Diaphragm (Mmd) 161
Power Handling (RMS) 600 Watts
Power Handling (MAX) 1200 Watts
Impedance 8Ω
Frequency Response 25 to 600Hz
Sensitivity 90.5dB 2.83V/1m
Voice Coil Diameter 2.58"
Thiele-Small Parameters
Resonant Frequency (Fs) 27.6Hz
DC Resistance (Re) 1.6Ω
Voice Coil Inductance (Le) 0.77mH
Mechanical Q (Qms) 4.42
Electromagnetic Q (Qes) 0.5
Total Q (Qts) 0.45
Compliance Equivalent Volume (Vas) 1.23ft³
Mechanical Compliance of Suspension (Cms) 0.21mm/N
BL Product (BL) 9.39T·m
Maximum Linear Excursion (Xmax) 13.25mm
Surface Area of Cone (Sd) 352.3cm²
Materials of Construction
Cone Material Aluminum
Surround Material Rubber
Basket / Frame Material Cast Aluminum
Mounting Information
Overall Outside Diameter 10.5"
Baffle Cutout Diameter 9.25"
Depth 5"
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity
suggestion)
Sealed Volume 0.55ft³
Sealed F3 46Hz
Vented Volume 1.5ft³
Vented F3 22Hz